ORIGINAL ROCKFORD FOSGATE PRIME USA R1200-1D 1200W RMS CLASS-D MONO AMPLIFIER

ORIGINAL ROCKFORD FOSGATE PRIME USA R1200-1D 1200W RMS CLASS-D MONO AMPLIFIER

The PRIME R1200-1D is an ultra-efficient mono amplifier for cars and trucks that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers.

The Prime R1200-1D subwoofer amplifier offers high efficiency through the implementation of its Class-D circuitry while delivering rich, full bass to any system. This car amplifier is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible) bass notes from damaging your subwoofer system. Match with a 4-channel stereo amplifier for your mids/highs and you'll have a Rockford Fosgate system that any Car Audio Fanatic will envy.

Technologies:

• CEA-2006 Compliant - Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
• CE Compliant- This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
• Class D - High efficiency amplifier design that reduces current consumption from the charging system.

Specifications:

• CEA-2006 Compliant: CEA-2006 Power Rating ; 400W x 1 @ 4Ω ; ≤1.0% THD+N
• Number of Channels: 1
• Total Power (Sum of Rated Power): 1200 Watts RMS
• Rated Power (RMS Continuous Power): 400 Watts x 1 @ 4-Ohm ; 800 Watts x 1 @ 2-Ohm ; 1200 Watts x 1 @ 1-Ohm
• Dynamic Power (PVC/PowerCube®): 499 Watts x 1 @ 4-Ohms 0° Res ; 898 Watts x 1 @ 2-Ohms 0° Res ; 1,400 Watts x 1 @ 1-Ohm 0° Res
• Bridgeable: No
• Frequency Response: 20Hz to 250Hz +/-1dB
• Input Sensitivity: 150 mV to 4 V
• Circuit Topology Class: Class D
• Efficiency (average): 85% @ 4-Ohm ; 85% @ 2-Ohm ; 80% @ 1-Ohm
• Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% ; 2-Ohm: <1.0% ; 1-Ohm: <1.0%
• Signal Input: Low Level: 1 RCA Pair
• Signal Output: Low Level: 1 RCA Pair
• Tone Controls: 0dB to +18dB @ 45Hz
• Crossover Controls: Low-Pass: Variable 50Hz - 500Hz @ 12dB/Octave
• Remote Controls: Punch Level Control (when connected, is linked to "gain control" to provide remote output level)
• Visual Indicators: Power ; Protect
• Power Wire Gauge: 4 AWG
• Power Input Connector: Block
• Speaker Wire Gauge: 12 AWG
• Speaker Output Connector: Block
• Cooling: Convection
• Heatsink: -
• Operating Voltage: 9 - 16 VDC
• Recommended Fuse (not included): 150 A
• Average Current Draw (13.8V Music): 55 A
• Max. Current Draw (13.8V Sinewave): 110 A
• Suggested Alternator: 100 A
• Dimensions (H x W x D): 1.97" x 6.77" x 11.06" ; (5cm x 17.20cm x 28.10cm)
• Shipping Weight: 7.825 Lbs. (7.82 Kg.)

Overview:

• Looking for more options? Check out all of our punch amplifiers here.
• 12dB/octave Butterworth crossover
• Infrasonic filter
• On-board Punch EQ with +18dB boost @ 45Hz
• Remote PLC (Punch Level Control)
• RCA pass-thru outputs
• Real time output and power supply thermal sensing
• Cast aluminum heatsink
• Top mounted controls
• 4 Gauge power/ground connectors
• MOSFET power supply
• Short circuit protection
• Muted turn on
• 1 Year Local Warranty By AutoCraft Electronics (M) Sdn Bhd