Talk To Us Live on WhatsApp

ORIGINAL ROCKFORD FOSGATE PUNCH USA P500X2 500W RMS 2 CHANNEL AMPLIFIER

P500X2

New product

The Punch P500X2 is a 2-channel stereo amplifier capable of producing 250 Watts into each channel at 2-Ohms. The P500X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.

More details

In Stock

By buying this product you can collect up to 4898 loyalty points. Your cart will total 4898 points that can be converted into a voucher of USD $12.


USD $1,199

-USD $245

USD $1,444

Check Shipping Rate

Add to wishlist

Ask Question About This Product

Frequently bought together

More info

ORIGINAL ROCKFORD FOSGATE PUNCH USA P500X2 500W RMS 2 CHANNEL AMPLIFIER

The Punch P500X2 is a 2-channel stereo amplifier capable of producing 250 Watts into each channel at 2-Ohms. The P500X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.

The P500X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk - that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.

Technologies:

  • CEA-2006 Compliant - Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
  • CE Compliant - This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
  • TRANS-ana - Trans-ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
  • Balanced Differential Inputs - Differential inputs eliminate noise picked up by signal cables.
  • DTM - Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
  • DSM - DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
  • MEHSA3 - MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
  • NOMAD - NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
  • Engineered In The USA - These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
  • C.L.E.A.N. Set-Up - Patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Specifications:

  • CEA-2006 Compliant: CEA-2006 Guidelines ; CEA-2006 Power Rating 150W x 2 @ 4Ω ≤1.0% THD+N
  • Number of Channels: 2
  • Total Power (Sum of Rated Power): 500 Watts
  • Rated Power (RMS Continuous Power): 150 Watts x 2 @ 4-Ohm ; 250 Watts x 2 @ 2-Ohm ; 500 Watts x 1 @ 4-Ohm Bridged
  • Dynamic Power (PVC/PowerCube®): 223 Watts x 2 @ 4-Ohms 0° Res ; 365 Watts x 2 @ 2-Ohms 0° Res
  • Bridgeable: Yes
  • Frequency Response: 20Hz to 20kHz +/- 1.0dB
  • Input Sensitivity: 150 mV - 12 V
  • Circuit Topology Class: Class A/B
  • Efficiency (average): 73% @ 4-Ohm
  • Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% ; 2-Ohm: <1.0%
  • Signal Input: Hi/Low level: 1 RCA pair
  • Signal Output: Low level: 1 RCA pair
  • Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or ; Punch EQ2 Treble: 0dB to +12dB @ 12kHz ; Function depends upon LP/AP/HP switch position
  • Crossover Controls: High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth ; Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth ; All-Pass: Yes
  • Remote Controls: Optional Punch Level Control (PLC2) Ready
  • Visual Indicators: Power/Protect/Thermal LED ; Input Clip LED3 ; Output Clip LED1,2,3 ; LED Color Legend: 1BLUE: <0.5% THD ; 2VIOLET: 1% THD ; 3RED: 10%+ THD
  • Power Wire Gauge: 4 AWG
  • Power Input Connector: Captive C-Clamp
  • Speaker Wire Gauge: 8 AWG to 18 AWG
  • Speaker Output Connector: Captive C-Clamp
  • Cooling: Convection
  • Operating Voltage: 9 - 16 VDC
  • Recommended Fuse (not included): 80 A
  • Average Current Draw (13.8V Music): 40 A
  • Max. Current Draw (13.8V Sinewave): 80 A
  • Suggested Alternator: 75 A
  • Dimensions (H x W x D): 2.38 x 7.76 x 13.28 (in) ; 6.05 x 19.71 x 33.73 (cm)
  • Shipping Weight12.3 Lbs. (5.57 Kg.)

Overview:

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • 1 Year Local Warranty By AutoCraft Electronics (M) Sdn Bhd

Reviews

Write a review

ORIGINAL ROCKFORD FOSGATE PUNCH USA P500X2 500W RMS 2 CHANNEL AMPLIFIER

ORIGINAL ROCKFORD FOSGATE PUNCH USA P500X2 500W RMS 2 CHANNEL AMPLIFIER

The Punch P500X2 is a 2-channel stereo amplifier capable of producing 250 Watts into each channel at 2-Ohms. The P500X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.

Ask a question

NO registration required!

Please leave your question below:.

(optional)
*(Required to be notified when an answer is available)
Path: > > > > ORIGINAL ROCKFORD FOSGATE PUNCH USA P500X2 500W RMS 2 CHANNEL AMPLIFIER

8 other products in the same category: